DG-1 ZDW43J series Kaiping machine
This equipment is a unit for unrolling, leveling and cutting steel coils to the required size. After manually feeding the plate head into the leveling machine, according to the set cutting length, the operating unit completes the leveling and cutting actions.
2. Equipment composition:
1.Uncoiler --- 2.Side guide device --- 3.Leveling machine --- 4.Shearing machine --- 5.Code material table --- 6.Electrical system
3. Equipment main structure and function:
(1). Uncoiler: used to support steel coils, bearing 25 ~ 30 tons. It consists of supporting mandrel and frame. After manually feeding the plate head into the leveling machine, the leveling machine pulls the steel coil to unfold.
(2). Side guide device: It consists of left and right brackets, guide rods, screw rods, slide seats, guide rollers, hand wheels, etc. It is used to adjust the position of the strip in the width direction of the unit to ensure that the strip does not deflect when entering the pinch roller. There are guide rollers on each side of the strip, which can be adjusted and moved by the hand wheel and the screw to adapt to different plate widths.
(3). Eleven-roller leveling machine: pinch and correct the steel plate. It consists of a machine base, a frame, a fixed roller base, a sliding roller base, 11 leveling rollers (upper 6 and lower 5), and an upper roller lifting adjustment mechanism. The motor-driven speed reducer is driven by gears to make the lower rollers rotate.
(4) .Shearing machine: stop and cut after reaching the size. Using mechanical shears.
(5) .Material table: steel plate after cutting.
(6). Electrical system: The system includes an operation console and an electric control cabinet.
Product specifications are diverse, please call Xiangxiang!